Can You Fix Your Commercial Oven Yourself?

Commercial ovens are slightly different from regular household ovens in terms of features and usage frequency. Since these machines are used throughout the day, the chances of them breaking down are relatively much more as well. So, in this article, we are going to look at some common commercial oven problems and see if you can fix them on your own before calling a commercial over repair technician.

Oven Not Heating To Appropriate Temperature

If your commercial oven is not heating to the appropriate temperature, there could be several reasons ranging from a faulty heating element to a gas igniter not working. Fortunately, you can easily diagnose the issue and maybe get the oven working again.

Before you do anything else, check the temperature sensor. It should not be in contact with the interior wall of the oven. Sometimes, while repairing, performing maintenance, or moving the oven, the temperature sensor gets misaligned and comes in contact with the interior wall.

This causes the sensor to record incorrect readings. At the same time, use an ohmmeter to make sure the sensor is working properly. If the meter shows no values, it means the sensor will need replacing. However, if the sensor seems to be working fine, you will need to check the heating element and gas igniter.

These components often develop problems if the oven is regularly maintained. Layers of dirt and dust can clog the heating element and gas igniter, not allowing the oven to function. Furthermore, it might also be that the oven needs calibration.

You can do it on your own by following the user manual or looking up videos on the internet.

Oven Not Self-Cleansing

As mentioned earlier, commercial ovens contain a lot more features that help with cooking and other basic tasks. That said, modern commercial ovens also come with self-cleaning features. However, that does not mean the oven will completely clean itself on its own if it is too dirty.

You will have to make sure it receives proper care and maintenance. If your commercial oven does not clean itself even after manual cleaning, you might need to replace the related components or even the control board.

In this case, you will be needing a professional’s help as technical issues like this carry a lot of risks. You can easily end up damaging other components without even getting near the actual problem.

Oven Not Cooking Food Evenly

It is often the case that customers complain of their meals not being cooked evenly. Sometimes, it could be the chef’s fault but, in most cases, it is the oven that seems to be the culprit. If you notice that your oven is not producing consistent results, it means something is wrong.

In the case of uneven cooking, you will need to check the igniter and thermostat. These tend to be the most common contributors to such problems. To check the heating element, simply preheat the oven and see if the elements light up.

At the same time, check the equation between the temperature and temperature sensor. If either of the components are showing trouble, you will simply need to replace them. Electric components can hardly be repaired or will not work for long even if you were to fix them somehow.

Replacing the components will require access to the components for which you will need to consult the user manual. Make sure to turn off the unit from the main power source.

Unresponsive Gas Burner

If you own an oven that runs on gas, an unresponsive gas burner is one of the most common malfunctions you will come across. In most cases, it is a dormancy issue. If the oven has not been used in a long time, dirt and dust particles can clog the burner.

To fix the issue, simply remove the burner grate, base, and cap. Try cleaning and removing any food particles. At the same time, inspect the wiring connecting the igniter and the control module. With time, these wires could wear out causing a malfunction.

If everything seems to be fine and the oven is still not working, it means you are looking at a far more complicated issue. You might need to replace the igniter or check the gas line.

This problem is common with commercial deep fryers too. If the gas burners are not responding, consider deep fryer repair Springfield or contact the utility company that supplies gas to your facility.

Faulty Control Board

A faulty control board means that your oven is dead. Then again, there could be several reasons causing the issue. In most cases, power surges tend to damage the control board. The best way to ensure that the oven won’t show any readings on the screen.

It will not respond even if it is getting power. Plus, you will need to access it to inspect for any burn signs or shortenings. Unfortunately, you will not be able to fix it on your own and will need a technician. Plus, control boards cannot be repaired. Even if it is, you won’t be offered any guarantee. So, it is better to replace the control board to avoid headaches later.

Oven Door Not Closing

Since commercial ovens are opened and closed numerous times throughout the day, it is obvious that the door will develop problems in the future. For instance, the oven door not closing is a common issue that can disrupt the business. Fortunately, fixing it is not that complicated either.

The first thing you need to do is unplug the oven and disconnect the door. Check the hinges and screws. If there are any signs of wear and tear, simply replace them. In addition to that, check the gasket around the door. The gaskets are made of plastic or rubber and will develop cracks with time.

So, if there are any unusual signs, simply replace the gasket. A faulty gasket may also cause the oven door not to close properly. Modern commercial ovens are loaded with safety features and won’t function if the door is faulty.

And plus, it might also affect the quality of your food.

How Can I Prevent Commercial Oven Problems?

Most commercial oven problems can easily be avoided if you perform regular inspections and maintenance. This helps you identify any unusual signs and fix them before your business is affected. The last thing you would want is your oven not turning on while the customers are waiting for their orders.

You should know that maintenance is not only about cleaning the oven but also repairing or replacing faulty components. Sometimes, the unusual signs or noises go unnoticed which eventually turns into a major problem.

However, if you were to closely observe the oven on a daily basis, you will be able to identify minor issues that could easily turn major. This is why it is your responsibility as an owner to be on the lookout for anything that might be suspicious and prevent it from happening again.

Conclusion

Commercial oven problems can vary in nature. Sometimes, you can fix them on your own, whereas in other cases, you will need the help of a commercial appliances repair Fairfax expert. However, it is important that you regularly inspect and maintain the unit to prevent complications in the future.

Most Common Crane Rigging Problems

Cranes are heavy equipment movers and essential for lifting and moving heavy loads in various industries. However, improper rigging can lead to accidents, injuries, and even fatalities. To ensure safe and efficient crane operations, it’s crucial to identify and prevent common rigging problems.

Common Problems in Crane Rigging

Rigging is the process of attaching and securing the load to a crane for heavy lifting. Proper rigging is critical to ensuring the safety of workers, the load, and the environment. To prevent deadly safety hazards, it is helpful to know about the common possible issues and how to avoid them.

Load Control Problems

Load control refers to the process of safely moving the load to its destination. Unfortunately, load control problems are all too common on construction sites. Here are the most common load control problems.

Load Drifting

Load drifting occurs when the load moves away from the path or destination. The cause can be many factors like uneven ground, high wind, and improper rigging techniques. Load drifting can be prevented by ensuring that the ground is level, using appropriate rigging techniques, and equipment such as tag lines to control the load’s movement.

Swinging

Swinging is another common load control problem, and it occurs when the load swings back and forth during lifting or moving. Swinging can be caused by a variety of factors, including improper rigging techniques, high wind, and uneven ground. To prevent swinging, it’s essential to use proper rigging techniques, such as using a spreader bar, and to ensure that the crane operator moves the load slowly and steadily.

Slipping

Slipping occurs when the load slides out of the rigging or sling, causing it to drop. One issue can be the wrong type of sling or rigging equipment, overloading the equipment, or improper rigging techniques. To prevent slipping, use appropriate rigging equipment for the load, ensure that the load is properly secured, and the equipment is not overloaded.

Causes and prevention of load control problems

To prevent these issues, it’s crucial to understand the causes of load control problems and implement preventive measures.

Proper Load Securement

Proper load securement is a critical factor in load control. Ensuring that you balance and secure the load properly can prevent problems. Moreover, using appropriate rigging and avoiding overload is also crucial for proper load securement.

Use of Spreader Bars

Spreader bars can be used to distribute the load’s weight evenly, reducing the risk of swinging or load drifting. Spreader bars come in various sizes and shapes. Therefore, selecting the appropriate one for the load is crucial. Spreader bars can also help prevent load slipping by ensuring that you secure the load properly.

Proper Use of Rigging Equipment

The proper use of rigging equipment is essential to prevent load control problems. Following industry guidelines, ensuring that the equipment is regularly inspected and maintained, and providing training for workers can help prevent load control problems. Furthermore, workers should also be familiar with the equipment they are using and understand the proper techniques for rigging and securing loads.

Equipment Problems

Equipment issues can lead to delays, increased costs, and even accidents that pose a threat to the safety of the workers involved. With that, You should know about different equipment like hooks, slings, and shackles and the common problems they may encounter.

Crane rigging equipment can encounter several issues, including:

Wear and Tear

Regular use of rigging equipment can cause wear and tear, such as fraying on slings, corrosion on shackles, or deformation of hooks. Correspondingly, this can compromise the equipment’s integrity and safety.

Improper Use

Using rigging equipment in ways it was not designed for can lead to equipment failure or accidents. For instance, overloading a sling or using a damaged shackle can put excessive strain on the equipment, resulting in breakage or malfunction.

Defects

Manufacturing defects, though rare, can pose risks to rigging operations. Equipment with faulty materials or designs can fail unexpectedly, even if used correctly.

Causes and Prevention of Equipment Problems

To mitigate equipment problems in crane rigging, consider these three proactive measures:

Regular Inspections

Conducting regular inspections of rigging equipment is crucial for identifying wear and tear, defects, or damage. Moreover, implement a thorough inspection schedule and keep detailed records of the equipment’s condition.

Proper Use and Maintenance of Equipment

Educate your team on the proper use of rigging equipment, ensuring they understand weight limits, suitable applications, and handling guidelines. Additionally, maintain a regular maintenance schedule to keep equipment in optimal working condition.

Replacement of Damaged or Worn Equipment

When rigging equipment shows signs of damage or wear beyond repair, it’s time for a replacement. Furthermore, don’t hesitate to replace compromised equipment, as doing so can prevent accidents and maintain a safe work environment.

Different Crane Rigging Communication Problems

The essential components for crane rigging MD are precise coordination and teamwork. Correspondingly, communication problems can sometimes occur in this line of work, leading to mistakes, delays, or even accidents.

Here are three common communication issues that can arise in crane rigging:

Misunderstandings

Misunderstandings can occur when signals or verbal instructions are misinterpreted or when vital information is omitted. Moreover, it can lead to incorrect rigging, delayed operations, or even accidents.

Language Barriers

Construction sites often bring together individuals from diverse backgrounds. Therefore, language barriers can create significant challenges. Furthermore, when team members don’t speak the same language, it can be difficult to relay critical information, leading to mistakes and delays.

Distractions

A construction site is a bustling, noisy environment. Background noise, ongoing activities, and other distractions can make it difficult for team members to concentrate on the task at hand. Additionally, this can lead to missed or misunderstood communication, further complicating the rigging process.

Causes and Prevention of Communication Problems

Thankfully, there are ways to prevent and address communication problems in crane rigging. Here are three practical tips:

Establishing Clear Signals and Communication Protocols

Team members should be trained to understand and use hand signals, verbal commands, and radio communication methods to maintain effective communication throughout the operation.

Providing Training on Rigging Terminology

It’s essential to provide comprehensive training on rigging terminology. It ensures that all team members are familiar with the relevant terms to communicate efficiently and accurately. Also, refresher courses should also be offered to keep everyone up to date with industry best practices.

Minimizing Distractions in the Work Area

While it’s impossible to eliminate all distractions in a construction site, taking steps to minimize them can significantly improve communication. For instance, designate specific quiet zones for crucial conversations or provide noise-canceling headphones for those in need of better concentration.

Possible Rigging Planning Problems

A comprehensive rigging plan is crucial for the success and safety of crane rigging operations. It outlines the steps, procedures, and equipment necessary to execute the job effectively. Furthermore, it takes into account factors such as load weight, rigging configurations, and environmental conditions. Moreover, well-designed rigging plan minimizes the risk of accidents, equipment failures, and project delays.

Here are three common rigging plan problems that can impact crane rigging operations:

Insufficient Planning

Inadequate planning can lead to numerous issues, such as choosing the wrong equipment, overlooking site-specific hazards, or failing to address contingencies. Furthermore, these oversights can result in inefficiencies, higher costs, or even accidents.

Inadequate Load Calculations

Incorrect load calculations can cause serious problems in crane rigging, as the equipment may not be able to handle the actual load safely. This can lead to equipment failure, damage to the load, or even worker injuries.

Lack of Coordination

A successful rigging operation requires seamless coordination among team members, including crane operators, riggers, signalers, and other workers. Lack of coordination can lead to miscommunications, mistakes, and delays, compromising the safety and efficiency of the operation.

Causes and Prevention of Rigging Plan Problems

To mitigate rigging plan problems, consider implementing these three strategies:

Thorough Planning and Preparation

Investing time and effort in thorough planning and preparation is crucial. This includes conducting site assessments, identifying potential hazards, selecting the appropriate equipment, and developing contingency plans. Additionally, well-prepared rigging plan helps to minimize risks and ensure a smooth operation.

Proper Load Calculations

Accurate load calculations are essential. Be sure to factor in the weight of the load, rigging equipment, and any other relevant variables. Proper load calculations enable the selection of suitable equipment and help to prevent overloading or underloading, which can lead to equipment failure or accidents.

Conclusion

Crane rigging plays a vital role in heavy equipment moving across various industries. However, improper rigging can result in accidents, injuries, or even fatalities. It’s crucial to identify and prevent common rigging problems, such as load control, communication, equipment, and rigging plan issues. Professional rigging services DC can ensure safe and efficient crane operations. By investing in proper planning, training, and equipment maintenance, as well as fostering effective communication and teamwork, professional workers can minimize risks and create a safer work environment.

The key to successful social media marketing

Social media marketing is the key to the success of an online business. Nowadays, it is much cheaper to market your business on the internet than to rely on the traditional forms of marketing. You should know how to get reviews, how to create content, and how to attract/retain your target audience.

All of this comes with experience and practice. The earlier you start to learn, the better off you will be with your business.

How to do successful social media marketing

Social media marketing is an effective way to promote your business online. It allows you to reach customers where they spend most of their time — on Facebook, Twitter, Instagram, YouTube, LinkedIn, Pinterest, Google+, and other sites.

Know Your Audience

If you want to get started with social media marketing, there are several things you should know before jumping into the fray. First, you must understand who your audience is. You can use tools such as Facebook Insights, Twitter Analytics, and Google Analytics to learn what types of people visit your site and which pages they’re spending the most time on. Once you’ve identified your target market, you’ll be able to create content that’s relevant to them.

Create Quality Content

If you want people to share your content, make sure it’s high quality. People won’t share something they think is low quality. They also won’t share anything that isn’t relevant to them. So, make sure your content is well written, interesting, and informative.

Engage with Customers

Another tip to help you succeed in social media marketing is to engage with customers. This means responding to comments and questions, liking posts, sharing other people’s content, and commenting on others’ content. It’s easy to do, and it will help build trust between you and your followers.

Measure Results

The key to successful social media marketing is measuring results. You want to know what works best for your audience and what doesn’t. For example, if you’re trying to get people to click on links to your website, then you’ll want to use images instead of text. If you’re trying to increase engagement, then you should post videos. And if you’re trying to drive traffic to your blog, then you’ll want posts that include links to your site.

Be Consistent

One of the biggest mistakes people make when trying to market themselves online is being inconsistent. They post one thing here, another there, and then wonders why no one pays attention. It’s because they aren’t consistent.

If you want to be successful at social media marketing, you must be consistent. You should post regularly, and you should post high-quality content. Posting consistently means posting every day, sometimes multiple times per day. High-quality content means posting videos, photos, and articles that are informative and interesting.

Conclusion

We hope that you now know what the most effective way of marketing your business is. To get started, you can just employ the most used strategies and later tweak them to your liking. However, do not forget to track the results so that you know if it is working or not.

All the knowledge is out there. You can simply just get it and then start working on it. The earlier you start marketing your business, the better off you will be. While the competition is huge out there, sticking to a niche can help you generate some income until your business gains recognition. Then you can go ahead and compete with the bigger players out there.

Don’t forget to generate reviews for your business. That should be a key area to focus because good reviews attract more buyers and hence, increase your business revenue.

What Is An EOT Crane And What Are Its Types

Transportation, construction, production, and other important industries make use of different types of cranes depending on the needs and tasks on a daily basis. Amongst them, EOT cranes tend to be fairly popular that run on electricity, and are used in industrial rigging. If you are looking for something that can easily carry out production and transportation tasks, the EOT crane is a perfect choice. Let’s take a look into what makes these machines stand out from the rest.

How Does An EOT Crane Work?

An Electric Overhead Traveling crane as mentioned earlier runs on electricity and is mostly found in factories that carry out a huge number of production and transportation tasks regularly. These machines are either controlled by radio, suspension pendant, or a cabin attached to the crane itself.

The versatility and ease of use make EOT cranes one of the most popular choices in several different types of industries such as steel, iron, mining, etc. Plus, EOT machines are also used both indoors and outdoors. EOT cranes are identified by a rail that supports a trolley meant for lifting and shifting weights. As a result, the crane does not experience any hurdles while it performs the tasks.

Types Of EOT Cranes

Single Girder EOT Crane

The single girder EOT crane features a single girder with a trolley and hoist that travels along the axis. Plus, it contains vertical gearboxes and mounted motors along with the main girder installed between the parallel runway, which does not require the rail component to move on the runway.

This makes it easy for it to be controlled via remote or a push-button pendant station. In addition to that, EOT cranes also utilize a snap action limit switch that provides help in up and down motion. However, these types are mostly designed to handle medium materials and objects.

Furthermore, Single girder EOT cranes have a lifting capacity of 20 tons and feature a compact size, which makes it easy for them to be installed and used in factories that are short on space.

Double Girder EOT Crane

It is similar to a single girder with the difference that it features a double girder. Additionally, double girder EOT cranes feature horizontal gearboxes and foot-mounted motors along with a crab mechanism that travels along the girders.

As compared to the single girder EOT crane, the double girder EOT crane can also be operated through a cabin, which comes attached to the crane. While operators can operate the crane using a radio remote control or push-button pendant but double girder cranes are mostly operated via cabin.

Moreover, double girder EOT cranes come with two types of limit switches. One is the rotary limit switch and the other is the gravity limit switch. While the rotary limit switch controls the upward and downward movements of the hook, the gravity limit switch is used for securing the limit switch working.

EOT Crane Maintenance

General Routine Maintenance

Since EOT cranes are heavy-duty machines, general routine maintenance is important to ensure that the components of the crane are in perfect working conditions to avoid any serious consequences. Considering the fact that these machines continuously lift and shift heavy loads, the weight can take a toll on the components leading to cracks or damage.

With that said, general routine maintenance should be performed at least every week, which includes checking the oil, filters, and adjusting and aligning the crane components.

Mandatory Compliance Inspections

Mandatory compliance inspections are crucial for the safety and security of the people working in the surrounding area. These inspections are carried out by an expert who records and informs any failures or potentially problematic components to the relevant authorities.

As a result, the evaluations make sure that the cranes follow the safety standards of the industry, which not only keeps the machines running in perfect condition but also helps prevent legal troubles down the road.

Conclusion

EOT cranes are a huge success in the production and manufacturing industries and most crane services VA keep a stock of these cranes. While they have several benefits to offer, it is equally important to perform general and mandatory inspections to keep the working environment safe. This ensures that the tasks are carried out as effectively and efficiently as possible.

Commercial Ice Maker Is Not Making Ice

A commercial ice maker is crucial to a business. If it is being used by a business that sells ice cream or a restaurant, the last thing you would want is to stop making ice during peak hours of the day. Because it might take a day to perform commercial ice maker repair. Therefore, to prevent such issues, we have compiled a list of some troubleshooting tips. Let’s discuss!

Check For Enough Room

When it comes to your commercial ice maker not making enough ice, the first thing you need to check is whether it has enough room to breathe. Even though it is a basic requirement when installing a commercial ice maker, but some businesses tend to overlook it.

Commercial ice makers like most kitchen appliances require proper air circulation. If that is not the case, then the machine will struggle to exchange airflow, which might lead to the unit turning out. As the unit turns hot, it will either result in damaging a component or it will shut off completely to help prevent damage.

Therefore, if you notice that your commercial ice maker is not making an appropriate amount of ice, the airflow is the first thing to be checked.

Check The Compressor

The compressor is the most important and expensive component of a commercial ice maker. If it happens to malfunction, not only will you end up losing a lot of customers but also end up paying for an expensive replacement. Therefore, you need to make sure that you keep your eyes and ears out for any unusual noise.

If you hear a squeaking noise from the ice maker, you should contact a professional and get it fixed immediately. Compressors have bearings inside that wear out with time. However, in some cases especially if the unit is old, you might need to replace the compressor.

Cleaning And Maintenance

Cleaning and maintenance go a long way when it comes to making sure that your machine runs flawlessly for years to come. However, unfortunately, most business owners tend to ignore this factor as well. As a result, they end up paying for expensive repairs and replacements down the road.

This means that if your commercial ice maker is not making a sufficient amount of ice or not making anything at all, you need to check if it needs maintenance. It could be that dirt, grime, and dust accumulation has taken place on different components, which is hindering the performance of the overall unit.

Check The Condenser Coils

Part of cleaning and maintaining your commercial ice maker includes checking the condenser coils. Similar to the compressor, the condenser coils play a crucial role in the functioning of a commercial ice maker. If the condenser coils tend to be dirty or oily, warm air will not be effectively filtered out and away from the machine.

The good news is that cleaning the condenser coils is quite easy. You do not need a professional to clean them. Simply grab a clean cloth, a soft scrub brush, and a cleaning agent. Make sure that the machine is switched off and not hot before cleaning.

Check For Cracks Or Damages

If you are using an older icemaker, you will need to check it for damages or cracks. The fact is that older machines tend to be more vulnerable to damages as compared to new ones. This means that you will need to perform regular inspections.

In some cases, the machine will not make any noise. If there is any damaged or cracked component, the machine will simply perform at its lowest. It might be that a crack has caused the refrigerant to leak. Such leaks are almost impossible to identify from the naked eye.

If the case is much more complicated, you will need to consult a specialist who will fix the problem for you. However, only opt for a certified professional who knows his way around commercial ice making machines.

Final Word

That’s it! We have shared common solutions to the issue of commercial ice maker not making ice. While some problems are easy to fix, others will require a commercial kitchen appliance repair Northern VA expert dealing with them. Therefore, be patient and take your time dealing with such expensive equipment.

Commercial Ice Cream Freezer Is Not Freezing

If you own an ice cream shop, the last thing you would want to have is a malfunctioning ice cream freezer. The temperature inside the freezer needs to be perfect. If the ice cream is too soft, it means that the temperature is not sufficient and you might even need ice cream freezer repair. Whereas, if the ice cream is rock hard, it means that the temperature needs to be adjusted. Whatever the situation might be, a commercial ice cream freezer should be operating at its optimum. Let us discuss the possible causes and their fixes.

Start From The Basics

Before you go deep down into the technicalities, it is suggested that you start from the basics. Sometimes, the problem could be as simple as the door not being closed properly. A blast of air can prevent the door from closing properly and therefore, the temperature drops. If you observe that the freezer is not producing cold air, then first check if it is receiving power. Inspect the circuit breaker as well. It might be that it is tripped. If any of the above is the problem, then you are lucky to have an easy fix.

Check The Door Gaskets

Believe it or not but many problems related to commercial ice cream freezer not freezing relate to the door gaskets. If the freezer is off-level, the door will not seal properly. For instance, if the door is slightly leaning forward, the door will remain ajar. One might think that the door is closed but actually it isn’t. Therefore, make sure that the freezer is placed on a leveled surface.

Another reason for the door not sealing properly is because it might be dirty. Since door gaskets have a rubber seal installed around them, the accumulation of dirt and debris can prevent the door from sealing properly. Maintain and make sure that the freezer is kept clean.

Check The Coils

Freezers have a set of coils installed in the back that provide freezing power. Furthermore, the refrigerant also circulates inside them and evaporates once it enters the coils. Evaporation is a crucial process that draws heat out of the freezer compartment. However, this will hinder the process if the coils are frosted. Inspect the freezer coils by pulling the appliance. You will have a clear view of frosting.

If frosting is found, you will need to defrost your freezer. If the freezer is a manual-defrost model, then you will have to do it yourself. Otherwise, if it is an auto-defrost model, then it should automatically defrost itself. However, if it isn’t, there is something wrong with the defrost controls.

Equipment Malfunction

Apart from the evaporator coils, the condenser is another important component of a freezer. The reason being that it is responsible for driving the refrigerant through the coil system. Therefore, it should turn on and off for the freezer to get cold. The component that informs the condenser to turn on is called a thermistor. Check the thermistor by turning the temperature all the way off to all the way on. Listen to a clicking noise if any. If you do not hear a clicking sound, then the thermistor is not working. You will need a professional to come fix it.

Maintaining Your Freezer

Commercial ice cream freezers are not cheap. These are heavy-duty machines that work round the clock to serve the customers. Therefore, you cannot afford it to break down in the middle of a busy day. Not only will it affect the sales but force your customers to shift as well. With that being said, a commercial freezer like many other restaurant appliances needs regular maintenance. It should be kept clean and maintained in addition to being regularly inspected for leaks or malfunctioning.

Final Word

Commercial freezers are tough machines but with time can develop problems. If you own a new freezer then the problem might be an easy one to fix. However, older models could pose technical issues. In both cases, perform regular inspections and make sure that you keep it maintained at your end and get the help of commercial freezer repairs Northern VA experts whenever necessary.

7 Steps For Fixing Your AC Refrigerant Leak

A refrigerant leak is one problem that can develop in your condenser pipes inside your air conditioner that can render the whole appliance useless. This makes it something that needs to be addressed on a priority basis for which you have to find an AC repair service. Here are all the steps involved to solve the refrigerant leak of your air conditioner.

Confirm that you have a refrigerant leak problem in the AC

The most obvious sign of a leak is that your air conditioner will fail to cool the room, even after a long time with all the settings cranked up to the max. This, however, does not automatically confirm that you have a leak, as there are other reasons as well for the air conditioner not working, such as compressor problems, so you will rule those out first before proceeding.

Disconnect power & let the unit rest before approaching it

When determining a leak, you need to let the air conditioning unit stabilize so that you can reliably detect the leak in the system. The way to do this is to make sure that any power going into the unit is cut and that the system is allowed to rest so that it can go back to its original state, before you take it apart for an inspection.

Determine the root cause of the problem before a gas refill

This is important. Just refilling the gas one more time, while the leakage is still present means wasting both time and effort, not to mention some expensive refrigerant gas, which can by the way, also pose serious health hazards if it’s allowed into the atmosphere. Common sense dictates that you must fix the leak first before refilling the gas in the air conditioner.

Check the entire piping of the air conditioner for the cause

Once you believe that the air conditioner has rested enough to stabilize, you are now ready to disassemble in and pinpoint the exact spot of the AC leakage, as well as what caused it in the first place, so that such a situation can be avoided to the best of your abilities in the future.

Remove any dust accumulated onto the condenser drain

When you disassemble the top cover of your air conditioner, chances are you will see that the piping is caked in dust. You must vacuum this out so that the work area where you will be observing for the leak is free of any hindrances.

Use a halogen bulb to zero in on the leak in the AC unit

Obviously, a leak like this will be impossible to detect from the naked eye. That is why you need some special apparatus to determine the location of the puncture. Now since you are not a professional with the right tools, you will need to do some improvisation, and that is to use a halogen bulb instead to light up the pipe from the inside and see where there is a leak or a hole.

See if the leak is repairable or a replacement is needed

Once you have determined exactly where the refrigerant leakage emanated, you are ready to patch it up if possible. If not, you might have to get a replacement. Afterwards, just fill up the unit with gas again and you are good to go.

Every minute that passes by with a refrigerant leak in your condenser coils can be deadly for the appliance, and so in order for you to be able to fix the problem in time, you first need to diagnose it. Unfortunately, the signs of such an HVAC issue are not immediately apparent, and it is not until a considerable amount of the gas has leaked that you will notice that your air conditioner is not functioning as intended.

In order to remedy this scenario, you need frequent AC or HVAC inspection and servicing by trained and certified air conditioning companies Fairfax only. This will not only enable you to find and fix any issues in time, it will also play a significant role in allowing you to perverse the overall lifespan of your AC, and ensure that it keeps working as expected for a long time to come.

Why Should You Rent A Boom Truck?

Boom trucks are common these days. If you are wondering why you should consider boom truck rental, we have created this guide to help you in this regard. Following are some of the reasons for or the benefits of renting a boom truck.

Access to Quality Equipment

Renting a boom truck is simpler and easier than buying one. The reason for this is that it allows you to get access to quality equipment and products. You can have the finest boom trucks within your access. Moreover, there are different brands offering the same services so you have further options to choose from a diverse range of boom trucks for your personal or commercial use.

Small Fast Jobs

The best thing about the boom trucks is that they are perfect to be deployed in smaller areas. Smaller size allows the boom trucks to move in and out freely and perform various tasks effectively. You will notice that it does not only save time but also provides comfort with the boom trucks. Certain jobs require the use of smaller cranes and they can be used there as well.

Customized Solutions

Another great thing about the boom trucks is that they can be customized. In other words, you have a wide range of options to choose from the equipment, tools and services. You can change the weight capacity, boom length, storage, accessories and other elements. With these options, it becomes really easy to use a boom truck for any particular project. This reason has increased the popularity of boom trucks.

It Saves More Money for Operations

There are two options; either to buy a boom truck for your projects or consider a rental. The first option requires finance and is surely an expensive option for anyone. The former is cheaper as well as more feasible for most people looking to use a boom truck. Therefore, you can save more money by renting them and the money saved can be used for further operations.

Provides Business Flexibility

Renting a boom truck has another advantage which is called the business flexibility. In simple words, if you buy a smaller or larger boom truck, it cannot be used everywhere. On the other hand, you can rent a boom truck of any size for any specific task. This provides more flexibility and options when it comes to choosing a boom truck. Therefore, experts advise to rent the boom trucks for small projects.

No Maintenance Headaches

There is no denying the fact that maintenance is a severe problem for many machinery owners. You may be a person who does not waste time in repairing or maintenance of the tools and equipment. For you, renting a boom truck is the best option. It spares you from the maintenance headache as well as the cost that incurs on maintenance. So, renting a boom truck is more user-friendly.

It Helps Handle Multiple Jobs

It is true that a crane truck can be used for multiple purposes. If you have rented it for a short task, it can also be used for regular and longer projects. This enhances the importance of the boom trucks and makes them more popular nowadays. Users find the boom trucks to be more effective that can be used for different tasks at the same time.

You Can Use them as a Crane

Another advantage and a big reason for renting the boom trucks is that these can be used as cranes. It is a fact that cranes are needed for different projects. Construction industry needs cranes. Even they are useful in factories. So, the boom trucks act as cranes but are way cheaper than the cranes. They perform the similar tasks cranes are used for.

Use for Lifting Workers

Last but not the least, the boom trucks can also be used for lifting workers and moving them from one position to another. On large construction or other sites where projects are carried out, cranes may be needed for lifting the workers. However, you can perform this task by using the boom trucks and this is what makes the boom trucks so useful. So, if your construction or commercial project needs a versatile crane, you should rent crane truck VA.

9 Reasons Why Every Expert Recommends Regular Restaurant Appliances Maintenance

You could have been through the experience of repairing or maintenance of restaurant appliances. There are certain benefits which you get with this. In this guide, you will find out why it is important to do timely and regular commercial appliances repair.

Reduced Costs

There is no denying the fact that repairing your restaurant appliances is way cheaper than replacing them with new products. If you hold a comparison of the two options, you will see the clear difference. Though new products offer better quality, you should decide whether you are in a position to buy the appliances. For small commercial kitchens, maintenance of the appliances is the best option as they can keep things going without spending much.

Extended Lifespan of Appliances

All the commercial appliances come with a certain time for which they last and work the best. It can be ten or fifteen years. During this time, the appliances will have minor issues which need to be fixed. But these issues do not mean that you rush for a replacement. Rather, repairing them will work and improve the lifespan of the product. This way, you can keep the appliances for a longer time period.

Preventing Food Spoilage

When your commercial freezer goes out of order, it will spoil the food. It will be an expensive mistake to make for anyone. Therefore, the appliances need to be repaired from a repair service as soon as possible when they go faulty. With bad products, you will find it hard to manage the restaurant, prevent food spoiling and serve the customers. So, you should go for maintenance in such cases.

Taking Precautionary Measures

Every restaurant is supposed to follow the precautionary measures regarding the appliances and equipment they are using. Your restaurant is also bound to oblige them. You cannot simply ignore the basic issues. Sometimes, the appliances may catch fire leading to further losses. They can also hurt any worker in the restaurant. Therefore, they need to be repaired in case of any issues. It improves safety level as well as ensures implementation of rules.

Ensures Smooth Working of Restaurant

In no season, you can run the restaurant without properly working appliances. Even when any of the products is faulty, it creates issues. Food may get spoiled. There may be a delay in serving the food. The customers will feel unhappy. You cannot handle all this. After all, it will hurt your restaurant reputation. With such things in mind, you should definitely go for maintenance of the restaurant appliances.

Improved Efficiency

It is a fact that when an appliance needs repair, it does not work properly. For example, the refrigerator may cause extra energy bills which is a burden for the restaurant owner. However, when the products are repaired and sent for maintenance, they are restored to their original functioning. It improves the efficiency of the products ultimately.

Keeping the Equipment Clean

There are a number of equipment and appliances which get dirty over time. It affects their performance and resultantly they stop working. In order to clean them and improve their performance, they need to be repaired. Thus, with the maintenance of your restaurant appliances, you have a chance to clean them. It comes in handy to offer healthy and clean food to the customers.

Get Rid of Sudden Breakdown

It cannot be denied that smaller issues with appliances can lead to a major one such as the complete breakdown. With this the products are unable to be used. You are left with no option. Either you have to spend a lot on repairing or replacing the appliances. In order to avoid these issues, you must follow a regular maintenance schedule.

Scheduled Maintenance of Restaurant Appliances

With everything discussed, it becomes imperative to inform the users that you need to follow the regular maintenance schedule of your appliances. Freezer, refrigerator, ice maker, oven and all other equipment should be sent for maintenance after a certain time period. Moreover, the product manuals also help you know more about the products, their maintenance schedule as well as how you can fix little issues at home. Manual will also provide you further details.

So, if you want to spend less on commercial freezer repairs Springfield, follow the maintenance schedule.