Why Is My AC Turning On And Off Repeatedly

If your air conditioning unit is frequently turning on and off, it is a sign of an issue that you must look into. The best way to fix this problem is by hiring an HVAC repair service. However, DIYers can use this guide to find out the major causes of an AC turning on and off repeatedly (short cycling of an AC).

Clogged Air Filters

Air filters are used to keep the evaporator coil and the air ducts clean. Dust and debris can clog the filters and they may require cleaning. If clogged air filters are not cleaned, the evaporator coil may freeze which can lead to various issues one of them being short cycling of the AC unit.

Moreover, clogged and dirty air filters restrict the airflow. This puts stress on the unit and can cause your air conditioner to turn on and off repeatedly.

Keep in mind that dirty air filters not only cause HVAC issues, but it makes the air conditioner use more energy increasing your energy bills. Therefore, clean or replace the air filters of your HVAC as required.

Thermostat Location

AC short cycling doesn’t always mean a problem with the air conditioner. In some cases, the culprit is the location of the thermostat.

If the thermostat of your AC is installed near the supply air vent or near a window through which sun rays impact the readings of the thermostat, your AC may turn on and off repeatedly without completing its cycles. It happens because when a thermostat is near a supply air vent, it will receive cool air and signal the AC to turn off much before the whole room or house is cooled.

Low Or Leaking Refrigerant

When the refrigerant (Freon) levels of an air conditioner are low, the AC might turn on and off frequently. Refrigerant is the coolant that is required to absorb heat and cool air. But when the refrigerant levels are low, the required amount of it to absorb heat and cool air is not present. The compressor doesn’t get the required aid to keep functioning normally and the AC starts turning on and off frequently.

Similar things happen if the refrigerant is leaking because a leak will reduce the levels of the refrigerant. In major leakages, the air conditioner may not turn on at all.

Refrigerant levels can be checked by a professional so whether you think that the refrigerant is low or leaking, consult an expert.

Oversized AC Unit

An improper HVAC size can lead to short cycling of the AC. If your AC is bigger than required for your home, keeping the temperature cool would be far easier for the unit. So, it will cool down much more quickly and turn off. This will appear as short cycling.

It may appear as a good thing that the AC is cooling your home and shutting down quickly, but this can lead to the breakdown of the unit because it is not completing its cooling cycle fully. Moreover, an oversized unit increases energy bills as well.

On the other hand, if you have an undersized AC unit, it will keep running constantly without cycling off.

The problem of an undersized or oversized unit can’t be fixed and the only way to fix it is by replacing the unit and installing an AC of the correct size.

Miscalibrated Thermostat

If your thermostat is miscalibrated, it won’t correctly detect the temperature of the room. Because of this, it will send on and off signals to the AC at the wrong times causing the HVAC unit to short cycle. So, calibrate your thermostat or have an expert do this.

Moreover, a faulty thermostat can cause the same problem as a miscalibrated thermostat. The thermostat won’t detect the temperature correctly due to malfunctions. For example, the room won’t be cool enough but the thermostat will send the off signal to the AC. In some other cases, it will keep the AC on even when the set temperature is reached causing the unit to run constantly.

Conclusion

A short cycling AC means that one or more components are not working as they are required. Consult air conditioning companies Fairfax to have a technician visit your place and inspect your HVAC unit.

Best materials for building a patio

Creating a beautiful and functional patio is a great way to enhance the value of your property and add to your overall quality of life. The key to creating a patio that is both attractive and durable is to choose the right materials. There are a variety of materials that patio contractors use, each with its own unique advantages and disadvantages.

The most popular patio materials

In this blog post, we will discuss some of the best materials for patio construction and what makes them a good choice.

Concrete

Concrete is a popular choice for patio construction because it is durable, versatile, and can be customized in a variety of ways. It is also relatively low-maintenance and cost-effective. With advances in concrete stamping and staining, you can create a concrete patio that looks like natural stone or other materials. Concrete is also a great choice if you have a specific design in mind since it can be poured to fit almost any shape.

Pavers

Pavers are a type of precast concrete or stone tile that is available in a variety of shapes, sizes, and colors. They are an excellent choice for patio construction because they are easy to install and repair, durable, and slip-resistant. Additionally, pavers are a great option for homeowners who like to change things up since they can be easily removed and reinstalled.

Natural Stone

Natural stone is one of the most beautiful and elegant options for patio construction. It comes in a wide range of colors and textures and adds a luxurious touch to any outdoor space. Some of the most popular types of natural stone for patios include flagstone, slate, and limestone. One of the main advantages of natural stone is that it is extremely durable and can last for decades if properly maintained.

Brick

Brick patios are a classic choice that is both stylish and durable. They are available in a variety of colors and patterns and can be laid in a variety of designs. One of the biggest advantages of using brick is that it is easy to maintain and repair. If you have a damaged or cracked brick, you can simply remove it and replace it with a new one.

Composite

Decking Composite decking is a relatively new material that is gaining popularity in patio construction. It is made from a combination of wood fibers and plastic, which makes it extremely durable and low-maintenance. Additionally, composite decking is slip-resistant and available in a variety of colors and styles. It is also resistant to fading, staining, and mold.

Choosing the Best Material for Your Patio

When selecting a material for your patio, it is important to consider your personal style, the climate in your area, and your budget. Here are some factors to consider:

Durability: Choose a material that can withstand the elements and the amount of traffic it will receive.
Maintenance: Consider the amount of maintenance required to keep the patio looking its best.
Cost: Different materials have different costs associated with them, so be sure to consider your budget.
Aesthetic appeal: Choose a material that will complement the look and style of your home and landscape.

Conclusion

Choosing the right material for your patio is an important decision that can impact the overall look and feel of your outdoor space. Each of the materials discussed in this blog post has its own unique advantages and disadvantages. Whether you choose concrete, pavers, natural stone, brick, or composite decking, the key is to select a material that is durable, low-maintenance, and aesthetically pleasing. By considering your personal style, the climate in your area, and your budget, masonry contractors Long Island can build a beautiful patio that you will enjoy for years to come.

When Should You Inspect Your Chimney

Usually, homeowners don’t give attention to the chimney unless the fireplace is not working. This behavior can lead to problems later when the chimney is dirty or damaged and causes accidents like a chimney fire or smoky fireplace. You need a chimney inspection to avoid problems and keep your fireplace providing warmth safely. Look for the below signs to know if your chimney needs inspection.

It’s Been More Than A Year Since the Last Inspection

A chimney inspection is required at least once a year so that your chimney is checked for leaks, cracks, creosote buildup, crumbling chimney mortar, and other issues. Many homeowners, get their chimneys inspected at the beginning of the winter season.

However, if the last time you had your chimney inspected was more than a year ago, you should consider a professional chimney checkup. Moreover, schedule a chimney inspection a month before winter every year so it doesn’t slip through your mind.

There Is Soot And Creosote Buildup

Soot and creosote are by-products of burning wood. Soot buildup is possible in oil and gas fireplaces as well. Both are black, tar-like substances that are flammable.

These substances keep getting produced and sticking to the walls of the chimney. When the buildup is thick, it can catch fire and cause a chimney fire.

We suggested earlier to get an expert to inspect your chimney yearly. However, you should keep inspecting your chimney every month or week, especially in the winter months when you’re using your fireplace daily.

With the inspection, you can notice problems and consult chimney experts. So, if you notice a 1/8 inch of soot and creosote layer on the chimney liner, get a chimney inspection. The professional will inspect the chimney and thoroughly clean it with special tools.

You Just Bought A New House

There are many things you should get inspected after buying a house. One of them is the chimney. This is necessary because you can’t know the condition of the chimney unless it’s inspected by someone. The chimney can have cracks, leaks, creosote buildup, spalling bricks, or other problems, so you must not skip a chimney checkup to ensure safety.

The Smoke From The Fireplace Is Filling The Room

A smoky fireplace is caused by burning wet wood or faults in the chimney. So, check your wood and make sure that it’s dry and seasoned. If it is, then you should perform a chimney inspection to know why the room is getting filled up with the smoke coming from the fireplace.

The cause of a smoky fireplace can be a closed damper or blocked chimney. Moreover, the reason can also be the absence of a chimney cap and water seepage.

Additionally, if your fireplace is not smoky but it’s giving off a weird smell, it can carbon monoxide. You should get your chimney inspection immediately.

Debris In Your Fireplace

Many animals and birds take refuge in a chimney to protect themselves from the cold. They can also bring leaves, twigs, and other items to make nests. Some of these leaves and sticks can fall into the fireplace and are a clear sign that you should inspect and clean your chimney.

Furthermore, debris in fireplace can be a hint of chimney cracks as well. A chimney inspection is necessary to determine the cause of the problems and perform repairs.

Stains On The Exterior Of The Chimney

A discolored chimney is a sign of various problems depending on the color of the stain. Chimney discoloration is easy to spot because it’s on the exterior walls of the chimney.

Black stains on a chimney mean excessive creosote buildup and require a checkup and cleaning.
On the other hand, blue or green stains indicate mold or algae growth on the chimney which is due to any moisture-related issue.
White stains are due to moisture in the bricks and the affected bricks may require replacement.
Red or brown chimney stains can result from rust. It could be water damage inside the chimney or rainwater flowing from the rusted chimney cap onto the chimney walls staining the walls.

Conclusion

Your chimney should be in tip-top condition to ensure the safety of your home and family. To avoid problems, get your chimney inspected by chimney contractors Bowie once a year.

How Do You Fix A Furnace Fan That Keeps Running

When the blower fan of a furnace keeps running continuously it is a sign of a problem which should be taken care of as soon as possible by heating repair services. However, you should know the reasons why it happens and the things that you can do to fix it.

Check The Thermostat Settings

The furnace keeps running issues could be because of incorrect thermostat settings. Therefore, check the settings of your thermostat first when you identify that the furnace is running without cycling off.

You should focus on two things when checking the thermostat settings. Firstly, the thermostat fan settings should be on AUTO. If the setting is at ON, switch it to AUTO because the ON button forces the furnace to keep blowing air until it is switched back to AUTO. Change the settings and wait for a few minutes to check if the furnace cycles off.

The second thing to check is the temperature settings. Sometimes, a furnace doesn’t turn off because the set temperature is too high and the weather outside is too cold so the furnace keeps heating and blowing hot air continuously to reach that temperature. If the temperature is too high, set it to low and notice any changes.

Ensure The Fan Limit Switch Is Not On Manual Mode

The fan limit switch controls the functioning of the furnace blower. You can find it inside the panel cover of your furnace.

When the fan limit switch is set correctly and working in optimum condition, it turns on the blower a few minutes after the thermostat sends the signal for heat and turns off the fan a few minutes after the heat cycle ends.

So, check the fan limit set and make sure it’s not on the manual settings because it will overall the thermostat settings and make the blower run continuously. You can check it yourself if you have knowledge of the furnace you have. See inside the furnace’s hood and you’ll notice a white button. It is the fan limit switch.

The button should not be pushed in because it means the manual mode is on. Push the switch out to switch it to the AUTO mode. If not sure, simply try to push the button out and check the furnace.

If you can’t find the fan limit switch, let a furnace technician check this for you and also change the settings if it is in manual mode.

Faulty Fan Limit Switch

A malfunctioning fan limit switch can also be the cause of the blower fan running all the time. You would have to replace the fan limit switch as soon as possible with an expert to fix the problem. This will also ensure an inspection from the expert who will be able to tell you more about the issues and also spot other problems if any.

Other signs of a faulty fan limit switch:

The furnace starts blowing cool air
The furnace begins short cycling (turns on and off in short intervals)

Thermostat Wiring Problems

If the wires in the thermostats short out they won’t be able to send signals to the furnace when to stop and start. This can keep the furnace running without stopping. You should inspect the thermostat and get it repaired or replaced for fixing the problem.

Fan Limit Switch Wiring Issues

Similar to the thermostat wiring, if the fan limit switch wiring is shot, it will stop the fan limit switch’s control over the fan. So, the fan may run continuously. You should perform repairs or replacement of the fan limit switch.

Furnaces Require Regular Maintenance

If you don’t want your furnace to break down in the middle of the night when it’s freezing outside, ensure regular maintenance. Replace the air filters, clean the air ducts, change the thermostat batteries, and follow the user manual for best results.

Conclusion

When a furnace doesn’t stop and keeps running all the time, the causes of the problem are the thermostat or the fan limit switch. An inspection can show if you only need to change their settings or if they are faulty and require replacement. Make sure to hire furnace repair services DC for fixing your furnace problems.

What Is Knee Osteotomy? Who Needs It And How To Prepare For It?

Knee injuries are hard to deal with and if you’re suffering long-term, then it’s better to visit an orthopedic surgeon and opt for an osteotomy. Here is everything you need to know about knee osteotomy.

Knee Osteotomy

Osteotomy basically means cutting off the bone. So, in general, a knee osteotomy is the process of cutting the bone of the knee, which can either be the tibia or femur, in order to alleviate the pressure and stress on the bone or the knee joint.

After cutting, the newly shaped bone is readjusted so that there isn’t any difficulty in moving or doing anything with your knee. It is a procedure done on people who have bone disorders like osteoporosis or arthritis and the kneecap is affected.

The earlier you get the surgery done, the better it will be for you. It will alleviate the pain in the knee as well because by cutting the bone and adjusting it, the weight is shifted and it seems to ease out any tension and pain in the kneecap.

Who Needs A Knee Osteotomy?

If you are suffering from any of these disorders, then you are a candidate for getting a knee osteotomy:

Osteoporosis, where the bones can get extremely porous and even the smallest impact can break or shatter it.
Early onset of arthritis, where only one knee cap is damaged, then you can get an osteotomy in order to distribute the stress of your weight on both knees perfectly.
Bone deficiencies, in which you have naturally delicate bones and your knee caps are under a lot of stress.
Here are some things you should know before getting this procedure done:
You shouldn’t be older than 60.
You should have an active lifestyle.
You should have adequate weight before getting this procedure done, otherwise, it may not make a huge difference.
If you experience pain in only one knee cap, then you should go for an osteotomy. If you get frequent pains in both of your knees, then this surgery might not be the best option for you to consider.
If you stand for longer periods of time and experience excruciating pain in the knee, then you can get this surgery don’t after consultation with your doctor.

Surgery Preparations

Here are the necessary preparations you need to do before the osteotomy takes place:

You will need an Anesthesia clearance before the surgery. For this, you will need to be admitted a day or two before the actual osteotomy.
You will need to stop smoking, and taking any blood thinning medication a few days before the osteotomy.
Here is the general run-down of a knee osteotomy:
The surgeon, after you are under Anesthesia, will make an incision right below the kneecap.
The bone that needs to be cut is marked with wires and then a saw is used to cut the guided area.
To hold the bone in place while the incision heals, the surgeon will place plates with screws on either cut side of the bone.

Healing And Post-Surgery Care

Now that the surgery is complete, your incision will heal timely and you are free to go home within 1 to 2 days after the surgery. The doctors might prescribe you painkillers and NSAIDs to help with the pain. Here are some things you need to take care of after the osteotomy is done:

Make sure the incision doesn’t get infected. Try to keep it dry and cover it when you’re taking a shower.
In order to limit the weight and stress on the newly adjusted bone, you will probably need to use crutches for walking for some weeks, before the doctor gives you a clear sign to start walking freely.
You will need to follow up with your doctor and have an x-ray after the surgery, just to see the progress and how your knee is doing physically.

Conclusion

There you have it! A knee osteotomy will help to get rid of the extra pressure and pain in your knee. And you will feel much better as far as pains and movements are concerned. Make sure to discuss your condition for with an orthopedic doctor for knee pain Woodbridge before going through a surgery.

How To Hire A Caterer For Your Event

Food is a major part of any type of event and you want to nail it to reach perfection. Just as you need researched for hiring event tent rentals, you need some tips for hiring the perfect caterer for your event.

Have A Menu In Mind

Before you even decide to narrow down a caterer for your event, the first thing you need to do is to have a menu. Having a menu will make the caterer selection a lot easier, because you will have something to give to the caterer, about what kinds of foods you want, how the food needs to be prepared, any special preferences, etc.

If you have a menu for your event, then you can automatically choose the caterers who will be able to execute the food you have in mind.

What’s Your Budget?

Another very important thing to consider is your budget for the menu. Make sure that you have an allocated amount of money set aside as the budget for the menu and food. This is what your quote will be when you go to different caterers.

Make sure that the menu isn’t too elaborate or over-the-top because it will obviously cost more and will affect your overall event budget as well. Try to go for a reasonable budget and negotiate further with the caterer, once the deal is sealed. You will have a clearer plan of action once you have your budget set.

Always Ask For Taste Tests

This is also an important thing to ask when you’re looking for hiring caterers for your event. Always ask for a taste test and the chef’s name, when going for finalizing the food items on your menu.

A lot of the time, the chefs at the time of the tasting sampling and at the event can be completely different and the taste and quality might alter too, so you want to make sure that you’re getting the same chef for your event as the one in the sampling. Also, a sample taste test will also give you an idea about how the food tastes and whether is it good or not.

The History Of The Caterer

References are very important when it comes to caterers. But, besides the usual, you want to take it a step further and look at past events with these caterers, their pictures, how they set up the food, and such.

You want to see how they work and put small details on the food and if the presentation is up to your expectations or not. These things will give you a good idea about the work ethic of the caterer and if their promises of delivering perfection are any good or not.

Do They Have What You Need?

Another crucial thing to look for, when scouting out the perfect caterer for your event, is to make sure that they know what you want. It’s very important that you paint a visual image of what you want the presentation of food to look like, what kinds of foods you want, when they should start serving, etc.

These things are the make-or-break of catering services and you want to find the perfect one which ticks all of the boxes and gives you exactly what you’re looking for. This is why you should never settle for the first option and always keep looking for better options.

Always Meet In Person

Last but not least, you want to meet the catering company and staff in person. You might underestimate the power of in-person meetings, but with something like food, you don’t want to wing it.

Make it your goal to at least have two meetings, if not more, with your caterer, during the selection process as well. This is where you can ask all of the miscellaneous questions and let them know what you’re looking for. Caterers will also appreciate your effort and concern and they will strive to give you the best service.

Conclusion

There you have it! With these tips, people will be raving about the food in your event for days. If it’s food, then it has to be something exceptional, so you need to do a bit more homework before choosing the perfect candidate. Many event rentals Rockland NY provide catering services as well so check with yours.

What To Know About Hair Smoothening

If you have unruly frizzy hair, then a hair smoothening treatment from a hair straightening salon will be your best friend. Here is everything you need to know about it and if it’s perfect for you or not.

Hair Smoothening – What Is It?

Hair smoothening is more like a general term and it is also known as Brazilian blowout or cysteine treatment, depending on the salon you go to and what this treatment does to your hair. It makes the hair smooth, shiny, and free from frizz.

If you have frizzy and slightly curly hair and you want to tame it, then you can definitely go for a hair smoothening treatment. It is different from normal keratin or protein treatments, because of the treatment concoction that is applied to your hair and the longevity of the overall treatment.

Hair smoothening can last anywhere from 2 to 6 months, and it is termed as a temporary way of hair straightening or smoothening. Whereas, keratin treatment lasts a lot longer and also can be classified as somewhat of a semi-permanent hair straightening technique. So, if you’re not digging the straight and smooth look, hair smoothening can be easily reversed and you can go back to your normal textured hair if that’s what you prefer.

Furthermore, hair smoothening doesn’t make your hair brittle or cause extreme damage, so hair health is pretty good even after getting this treatment. It also promotes healthy hair growth and your hair does look a lot stronger and healthier, which is a great thing.

Hair Smoothening Process

Here is a step-by-step guide as hoe hair smoothening is done on your hair:

Firstly, you want your hair to be completely clean. If there is any sort of product in your hair, then the treatment will not have the same results. This is why, if you haven’t already washed your hair, the stylist will do it for you. Your scalp is the main focus when washing the hair because you want it to be free from sebum, product buildup, and unwanted grease.
After your hair has been shampooed and conditioned, it is dried with a blow dryer and divided into multiple sections. It’s important that you have dry hair for the coming step because now is the time for the application of the smoothening cream or treatment.
A cysteine or smoothening treatment is applied to your hair, making sure that the treatment is not touching the roots. Since there are some harsh chemicals in it, you don’t want the roots to be exposed to these chemicals. The treatment is allowed to sit in the length of your hair for 30 to 40 minutes and then it is washed off and the hair is blow dried again.
Afterward, a flat iron is run through your hair to seal the deal. Then, a conditioning treatment is applied to nourish and protect the hair, and is washed off after 20 to 30 minutes. The hair is dried one last time and styled accordingly and you are good to go.

Pros And Cons Of Hair Smoothening

Here are some good and not-so-good things about a hair smoothening treatment.

It is temporary which can be a good or bad thing, depending on what you want. If you want something permanent and don’t want to change it, then this might not be the treatment for you, but if you like changing things around, then give it a go.
It is not good for extremely thick curly hair, because the treatment will not be able to break the protein in the frizz and the results won’t be the same.
It’s not a damaging treatment. It keeps the hair looking shiny and full of life and it gives the hair a healthy look.
The treatment does contain formaldehyde, which can be irritating for some people as they have sensitive scalps.
It gives the hair a natural, healthy, and subtle look.

Conclusion

There you have it! All hair treatments are different and cater to different needs and types of hair. If your hair falls in the category of hair smoothening, then you can give it a try. Only go to expert hairstylists of a Brazilian keratin salon Bethesda to avoid hair damage and get straight hair.

Is It Normal For A Furnace To Run Nonstop

Having a furnace in your house to keep you warm and cozy when it is freezing outside is a blessing. However, just with anything, furnaces tend to experience problems as well. A common problem is that the furnace runs constantly. While it depends on the temperature, the furnace should not work continuously to maintain the temperature and you should check it yourself or by furnace repair services.

So, we are going to take a look at why your furnace might be running nonstop and what you can do about it.

Blower Issues

The first thing you need to check if your furnace is running nonstop is the blower. If you notice that the furnace is running but is blowing cool air, it means there is some issue with it. It might be that there is a shortage somewhere that is causing the blowers to malfunction.

Although, you can inspect the blower for any corroded wires or damage, etc. but do not attempt to fix the issue on your own. You can end up electrocuting yourself.

Dirty/Clogged Filter

If you observe that the air coming from the vents is warm but the airflow is weak, it means the filters are most likely clogged. Furnaces come with filters installed as well just like the air conditioners. These filters make sure toxicants are removed from the air before it is distributed inside the house.

As a result, these filters are prone to getting dirty and clogged with time. Furthermore, clogged filters prevent the necessary air from moving into the furnace. This leads to a failure in reaching the desired indoor temperature.

Consult the user’s manual and check the replacement or cleaning interval. It might be that the filters need to be replaced. So, make sure you opt for the exact replacements.

Thermostat Issues

Next, you will need to check for thermostat issues. Ensure that the thermostat is to “ON” settings instead of “Auto”. The reason is that if the settings are set to “ON”, the furnace might run constantly. However, if it is turned to the “Auto” position, the furnace should turn off as soon as it reaches the required temperature.

But if you notice that the furnace keeps running considering the thermostat settings are correct, it means that there is something wrong with the thermostat. In this case, you will need to consult a specialist who will replace it for you.

Pilot Light Issues

If you own an older furnace, it might have a pilot light that stays lit as long as the furnace is on. If that is the case, you will observe your furnace only blowing cool air and running constantly. So, if the pilot system has some issues, it might be causing the furnace to run constantly. You will need to contact a specialist to fix the issue.

The Furnace Is The Wrong Size

Another possible reason for your furnace to be running non-stop is if it is of the wrong size. This is one of the most common problems out there as homeowners ignore this basic factor. An wrong sized furnace will not be able to tackle a room that is either too small or big.

Choosing the correct furnace size is critical. This is why buyers are suggested to measure the room size and purchase the furnace accordingly. If the room happens to be big but the furnace is small, it will run constantly to achieve the desired temperature. This would only lead to higher energy bills in the future.

How Often Should My Furnace Cycle In The Winter?

The winter season can give your furnace a tough time. After months of being dormant, your furnace suddenly finds itself working overtime. So, it will undergo some stress. Prepare your furnace for winter before using.

Furnaces are designed to cycle multiple times during the day. However, if it cycles throughout the day, it might indicate a problem. There is no universal answer to how many times your furnace should cycle in a day. But it should not be cycling throughout the day. Anything between 3 to 8 times per hour is considered normal.

Final Word

In the end, a furnace running non-stop is not something normal. If that is the case, you will need to follow the tips mentioned above or consult furnace services Long Island if the situation seems more complicated.

Signs of aging hair extensions

Will your hair extensions become thicker after washing them? This is one of the things that ladies ask most frequently before getting hair extensions. In contrast hand, the answer to this query is not that straightforward. Depending on your particular scenario, a hair salon can give you the best advice.

You should bear in mind a few standard guidelines when using hair extensions. The type of extensions determines whether they will thicken. Some extensions thin down when they are in contact with water. The extension absorbs more water as it becomes thicker, giving the impression that it is more voluminous. Some hair extensions look thicker after being washed.

Hair extensions’ aging processes

By reading this article, which seeks to fully address this question, you can have a deeper understanding of the problem.

Variations in curling

The way your hair extensions are curled often determines whether they will become thinner or longer after washing. For instance, the connections will get thicker if your hair is curly. On the other side, straight hair extensions won’t become much thicker.

Fiber

The kind of fiber utilized to produce the hair extension has an impact on its final texture as well. For instance, human hair extensions can get thicker with time. Your scalp’s sebum and oils are to fault for this. After all, a single piece of hair has three strands.

Extensions from this company

Like other hair care products, hair extensions are made by a number of companies. The quality of each set of hair extensions varies as a result. Your extensions will have a varied appearance depending on where you get them and the brand.

For instance, hair extensions from a reputed salon are less prone to thin out. Poor-quality extension hair, on the other hand, typically starts to weaken or lose its shine after just a few washings. The hair consequently seems fragile and unruly.

They ay absorb oil and moisture. As a result, the hair strands stay shiny and the hair fiber is maintained wet.

Maintenance

Hair extensions require the same maintenance as other items. There isn’t much of a distinction between long, medium-length, and short hair. Hair extensions could have an influence in terms of appearance. If you want them to last a long time, you must take care of them.

Use extra caution when washing or detangling your hair, for instance, to prevent harming your hair. After adding hair extensions, be mindful to just wash your hair occasionally. On the other hand, if you wear clip-in extensions, they should be washed at least once every month.

Like genuine hair, stitched hair extensions can be washed. On the other hand, excessive washing might harm the fibers of the hair extensions.

Finally, it’s important to make the right purchases as well. In the long run, purchasing hair extensions from a reputable supplier will save money and time. Generally, you are better off getting help from high-end salons that employ expert hairstylists. Otherwise, you will not get the results that you are looking for and your hair extensions may not last long.

Conclusion

Over time, your hair pieces may get thinner or thicker. It matters a lot what hair extensions you employ and how you take care of them. The tendency for extensions to begin to wane after a few months is typically a huge no. You are fine to go as you keep in mind the advice we provided in this post.

You could convey your concerns to the hair extensions salon there and ask for further details. The best people to ask for advice on how to take care of your extensions are experts.

Can You Put A Car Window Tint On Top Of A Tint

You will hardly come across any vehicle today without window tints. However, some people still want to take it to the next level by applying an additional layer of tint to the existing one. You can install a tint over tint on car windows but it is important that you follow the correct auto glass tinting techniques. Let’s discuss!

Is It Bad To Put Tint Over Tint?

If your car windows already have a tint installed from years ago, it might not be a good idea to add another layer. The reason is that two layers of tints applied on a window glass is called “double-dipping”. But it leads to air pockets and bubbles between film layers that create unsatisfactory results.

Are There Benefits To Applying Tint Over Tint?

Applying window tint over an existing window tint does offer some benefits. If the older layer is peeling off or has faded, the new layer will keep it from worsening or getting scraped. Plus, it increases the shade percentage so it become darker.

Moreover, even if the existing layer of tint is not peeling off, applying a new layer of tint will still offer some benefits. For instance, putting two layers of tint will improve heating prevention, abrasion protection, chemical resistance, etc.

In most cases, owners tend to apply a window tint over an existing one just to save money. However, they get diminished benefits in return. Then again, if there is already a tint installed on the windows of your vehicle that has started to peel off or worsen, you can install a new layer on top that will prevent it from worsening.

However, you will need to be sure that you opt for the same type and color to prevent a mismatch.

Can I Tint Over Factory Tint?

Factory-tinted windows are a lot different than the aftermarket ones. Factory-tinted windows tend to last a lifetime and hardly peel off or fade. At the same time, removing a factory tint is a painstaking task as well. So, if you want to darken the windows, you can install a new layer of tint.

But this should only be done by a professional. If you intend to do it on your own, you might end up scratching the factory tint.

Types Of Car Window Tints

Ceramic Tint

Ceramic window tints when compared to regular window tints cost a lot more. In fact, these are the most expensive types as compared to the rest of the types for all the right reasons. To begin with, ceramic tints have a higher visible light transmittance and are also scratch-resistant. On top of that, these tints have a longer lifespan as well.

As a result, ceramic tints are the most popular choice. Keep in mind that ceramic tints are divided into two categories: dyed and dyed-in. Dyed-in tints are colored with infrared dye whereas dyed tints are colored with pigment coating.

Carbon Tint

Carbon tint is usually dark and dull, resulting in a matte finish once installed on the windows. Carbon windows act the same way as other types of tints, reducing the amount of light entering the car while keeping the original color of the windows intact. But the only difference is that the finish is matte.

Metallic Window Tint

Metallic window tints are another option to keep your car cooler during hot days. Metallic window tints instead of absorbing the heat tend to deflect it. This is why metallic windows and tints are a popular sight in buildings and homes.

The reflective ability of these tints keeps the heat and UV rays out. There is simply no chance for the light to pass through. However, these tints are not usually found on vehicles but are mostly for commercial purposes. So, installing them over an existing layer of the film might not be a good option.

Final Word

In the end, installing a window tint over an existing window tint is possible. You will have to make sure there are no particles or bubbles that reduce the lifespan of the tints. And go to a reputable car window tinting shop Springfield instead of doing it on your own.